| View previous topic :: View next topic |
| Author |
Message |
Todd
Joined: 22 Aug 2007
Posts: 1926
Location: Avon, OH
|
 Posted: Tue Jun 24, 2008 1:08 pm Post subject: Firmware upgrades |
 |
|
In order for you gauge to be "upgradable" to the latest firmware with only a reflash required, you must have firmware version 2.0 or higher and the back of your unit must look like this:
The reflash will cost $20 plus return shipping of $7.
If your gauge is older than this, the only option is for us to replace the main circuit board before doing the reflash. This costs $106 which includes the board, reflash, and return shipping.
Please contact service@aeroforcetech.com if you want either of these options. They will tell you how to proceed.
Todd
_________________
Aeroforce Technology
Last edited by Todd on Mon Nov 02, 2009 2:25 pm; edited 3 times in total |
|
| Back to top |
|
 |
gtpforever
Joined: 07 Feb 2009
Posts: 1
|
| Posted: Sat Feb 07, 2009 11:02 pm Post subject: |
|
|
Are the prices for just the single gauges or is it for the duals also?
Thanks
Troy |
|
| Back to top |
|
|
Todd
Joined: 22 Aug 2007
Posts: 1926
Location: Avon, OH
|
| Posted: Tue Feb 10, 2009 2:42 am Post subject: |
|
|
| gtpforever wrote: | Are the prices for just the single gauges or is it for the duals also?
Thanks
Troy |
A reflash is the same cost ($27), but if you need updated hardware you'll have to add $90 for the second gauge for a total of $196.
Todd
_________________
Aeroforce Technology |
|
| Back to top |
|
|
moreause
Joined: 09 Feb 2009
Posts: 4
|
| Posted: Fri Feb 27, 2009 10:37 pm Post subject: |
|
|
would it be possible to change hardware and reflash my SECOND gage of a dual srt-4 srt to become PRIMARY and add a wire
so i could sell my old primary as an one gage unit... |
|
| Back to top |
|
|
Todd
Joined: 22 Aug 2007
Posts: 1926
Location: Avon, OH
|
| Posted: Sat Feb 28, 2009 1:00 am Post subject: |
|
|
| moreause wrote: | would it be possible to change hardware and reflash my SECOND gage of a dual srt-4 srt to become PRIMARY and add a wire
so i could sell my old primary as an one gage unit... |
Do you mean add the wire for the output module? If that's what you mean then yes. We don't sell single OBD2 cables though.
Todd
_________________
Aeroforce Technology |
|
| Back to top |
|
|
moreause
Joined: 09 Feb 2009
Posts: 4
|
| Posted: Sat Feb 28, 2009 9:57 am Post subject: |
|
|
| Todd wrote: | | moreause wrote: | would it be possible to change hardware and reflash my SECOND gage of a dual srt-4 srt to become PRIMARY and add a wire
so i could sell my old primary as an one gage unit... |
Do you mean add the wire for the output module? If that's what you mean then yes. We don't sell single OBD2 cables though.
Todd |
nop i was asking for the wire and connector that goes from the gage to the obd port so i could split my dual kit to 2 single gages
could i use this one
Dual Cable:
One OBD2 connection splits into to gauge connectors allowing two single gauges to be used as a dual. Single FD and single SR gauges are not meant to be run as duals however
$25
and just not use the second output ?? |
|
| Back to top |
|
|
Todd
Joined: 22 Aug 2007
Posts: 1926
Location: Avon, OH
|
| Posted: Tue Mar 03, 2009 2:25 am Post subject: |
|
|
Two singles would cost $478, so if you want to turn your dual set into two singles you could send the second one here and we can reflash it for $478-$399 = $79 plus shipping. You'd get the proper single cable including with the gauge when it was returned. This is assuming you have the current hardware version shown above which has been in use now for about 18 months. We cannot reflash older hardware with current firmware.
Todd
_________________
Aeroforce Technology |
|
| Back to top |
|
|
VortecBlazer
Joined: 29 Jan 2009
Posts: 10
Location: Jax,FL
|
| Posted: Thu Mar 05, 2009 12:27 am Post subject: |
|
|
i'm looking at sending my guage back for the mpg and performance issue, and getting a reflash at the same time.
one problem i see now is that my gauge maybe old and need a new board
the pat pend sticker on the back says PT101 FI
i'm guessing that's pretty old, how can i tell what version i have, Todd? |
|
| Back to top |
|
|
Todd
Joined: 22 Aug 2007
Posts: 1926
Location: Avon, OH
|
| Posted: Fri Mar 06, 2009 3:10 am Post subject: |
|
|
| VortecBlazer wrote: | i'm looking at sending my guage back for the mpg and performance issue, and getting a reflash at the same time.
one problem i see now is that my gauge maybe old and need a new board
the pat pend sticker on the back says PT101 FI
i'm guessing that's pretty old, how can i tell what version i have, Todd? |
Yeah, that's a few years old. In order to get the latest firmware, version 2.6, you would need the main circuit board replaced.
Todd
_________________
Aeroforce Technology |
|
| Back to top |
|
|
VortecBlazer
Joined: 29 Jan 2009
Posts: 10
Location: Jax,FL
|
| Posted: Fri Mar 06, 2009 8:58 pm Post subject: |
|
|
| any major upgrades that would be worth it for my to go to v2.6? i mainly want to access the other parameters that my brother can in his camaro, i believe he bought his at the same time so it should be almost the same version as mine |
|
| Back to top |
|
|
bonneville04
Joined: 13 May 2009
Posts: 2
Location: Lake Zurich
|
| Posted: Wed May 13, 2009 12:42 am Post subject: |
|
|
this is the back of my guage, which upgrade price do i need?
 |
|
| Back to top |
|
|
Todd
Joined: 22 Aug 2007
Posts: 1926
Location: Avon, OH
|
| Posted: Wed May 13, 2009 6:02 pm Post subject: |
|
|
That is the short lived second generation board. You'll need to upgrade to the latest hardware which has the shrowd around the analog input connector and 2 pin power jumper.
Todd
_________________
Aeroforce Technology |
|
| Back to top |
|
|
Todd
Joined: 22 Aug 2007
Posts: 1926
Location: Avon, OH
|
| Posted: Wed May 13, 2009 6:03 pm Post subject: |
|
|
That is the short lived second generation board. You'll need to upgrade to the latest hardware which has the shrowd around the analog input connector and 2 pin power jumper.
Todd
_________________
Aeroforce Technology |
|
| Back to top |
|
|
bonneville04
Joined: 13 May 2009
Posts: 2
Location: Lake Zurich
|
| Posted: Thu May 14, 2009 1:09 am Post subject: |
|
|
| thanks todd, so thats $100+? |
|
| Back to top |
|
|
Todd
Joined: 22 Aug 2007
Posts: 1926
Location: Avon, OH
|
| Posted: Fri May 15, 2009 2:03 am Post subject: |
|
|
yes
_________________
Aeroforce Technology |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
