Products
Interceptor
Analogic
Aeroscan
Sensors


SEMA Member
MAP SENSORS
The sensor kits listed below are OEM quality units with 0-5v outputs which are compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions. Click on the "Manuals" link on the navigation bar at the top for installation instructions.

2 and 3.5 bar MAP (manifold absolute pressure), and 100 psig boost sensor kits:
These sensor kits contain an OEM sensor with 0-5v output and correct weathertight connector and pigtail. 100 psig sensor has a male 1/8" NPT fitting. These sensors can be used on an any vehicle.

GM style 2 Bar MAP with connector/pigtail:
- Reads up to 15 psi
- Sensor requires 5v power
$55


3.5 bar (50 psia) MAP sensor with connector/pigtail
- reads vacuum to 35 psig
- uses 12v power for easy installation
$64.99



100 psig boost pressure sensor kit:
- (Includes connector/pigtail)
-accurate to +/- 1 psi
- 5v regulator for power recommended but not required.
$65


5v regulated power supply
Simply connects to switched 12v and ground to supply 5v to our 2 bar MAP sensor kit. Eliminates the need to tap into other sensor lines or the PCM to obtain 5v.

$23.00 

For questions visit our forums here and go to the "Sensor Kit" subforum.

YOU ARE BROWSING: HOME | PRODUCTS | SENSORS 2005-2009 Aeroforce Technology Inc. All rights reserved.     MADE IN THE USA
SITE BY: MediaBrand