Products
Interceptor
Analogic
Aeroscan
Sensors


SEMA Member
The sensor kits listed below have 0-5v outputs which are compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions.

Sensors have a range of 150 and 300 psi and come with the proper mating connector and 5' pigtail. They have a 1/8" male NPT fitting.

We also carry -4 adapters, listed below, to help with fuel pressure installation.

150 psi oil pressure sensor kit:
- (Includes connector/pigtail)
- accurate to +/- 1 psi
- 5v regulator for power recommended but not required.
$65


150 psi fuel pressure sensor kit:
- (Includes connector/pigtail)
- accurate to +/- 1 psi
- 5v regulator for power recommended but not required.
$65



4AN fitting with 1/8" NPT port. Allows you to install a 1/8" NPT sensor to a -4AN fitting. Has a female -4AN on one end, male -4AN on other end, with a 1/8" NPT tap in the adapter body. Comes with -4AN cap for the male end.
Note: -4 cap is included
$25


300 psi pressure sensor kit:
- (Includes connector/pigtail)
- can be used for air or fluid pressure
- 1% of full scale accuracy
$65


5v regulated power supply
Simply connects to switched 12v and ground to supply 5v to our sensors kits. Eliminates the need to tap into other sensor lines or the PCM to obtain 5v.

$23.00 

For questions visit our forums here and go to the "Sensor Kit" subforum.

YOU ARE BROWSING: HOME | PRODUCTS | SENSORS 2005-2009 Aeroforce Technology Inc. All rights reserved.     MADE IN THE USA
SITE BY: MediaBrand