AeroForce OBD2 Ethanol Content and Fuel Temperature Sensor Kit for CAN bus vehicles.
- Works with 2008 and newer vehicles and others made prior using a CAN bus.
- More accurate than analog 0-5V output kits, no grounding issues, no conversion issues.
- Kit contains the GM/Continental ethanol sensor, 10' sensor to controller cable, controller, OBD2 pass thru cable, and power harness. Controller size is: 3"x 2"x 0.36".
- This kit injects the ethanol content and fuel temperature read from the sensor into the CAN bus data stream using the OBD2 pass thru cable. Can be read via our gauge and other third party devices that allow you to enter user defined PID's.
- The kit's controller emulates an ECU using a CAN address that should work well on most CAN bus vehicles but can be changed by the user if there is a conflict.
- Can be used by aftermarket or piggyback tuning modules or ECMs, scantools, and OBD2 products such as our Interceptor scan gauge that can recognize this OBD2 parameter.
- Fuel Temperature range: -40 deg to 257 deg F
- Ethanol sensor accuracy: 3% of reading
Tuner Info:
- CAN bus ID 11 bit and 29 bit (self detecting)
- CAN bus ECU# 0x7E6 (default) but can be changed by user
- CAN bus PID 0x52
- CAN bus update rate 10Hz
- Data 0: Ethanol % = 8 bit
- Data 1: Fuel Temp (C) 8 bit -40
NOTE: In order for this to work with our Interceptor OBD2 gauge, the gauge must have firmware version 4.0 or higher. For VW/Audi gauges version 6.3 or higher. We can reflash older gauges with the newer code if this item is purchased, buyer just pays for return shipping.